TY - JOUR AU - Azize Akcayoglu AU - Cenap Ozgun AU - Celal Nazli AU - Fuat Yilmaz AU - Ali Pinarbasi PY - 2014/05/20 Y2 - 2024/03/28 TI - OPTIMUM DISTANCE BETWEEN VORTEX GENERATORS USED IN MODERN THERMAL SYSTEMS JF - European Scientific Journal, ESJ JA - ESJ VL - 10 IS - 10 SE - Articles DO - 10.19044/esj.2014.v10n10p%p UR - https://eujournal.org/index.php/esj/article/view/3266 AB - Modern thermal systems in which hydrodynamics and thermal fields are strongly related to each other involve compactness and effective heating/cooling performance. Triangular ducts, having delta-wing type vortex generators (VGs) mounted on the duct’s slant surfaces, are widely used in modern thermal systems including gas turbines and electronics cooling applications. Due to the existence of completely opposite results obtained in terms of performance of the two types of VG configurations –namely “flow up” and “flow down”-, in the open literature, in the present study, both hydrodynamics and thermal fields together with the secondary flows induced by the VGs have been analysed extensively to understand which configuration has the better thermo-hydraulic performance. The results show that one configuration has a 19% higher thermo-hydraulic performance over 32 different VG configurations -containing “flow-up” and “flow-down”- for hydraulic diameter based Reynolds number, Re=5000. The angle of inclination of each VG made with the flow direction is set to 30° and the inclined surface’s wall temperatures are set to 80°C. Based on the current results, the optimum distance between successive VGs has been determined as 0.385 of the hydraulic diameter. The present CFD results have been validated against the PIV data ER -