Characterization Analysis of Textured and Diffused Monocrystalline Silicon Wafer

  • Asrafusjaman Rubel Department of Mechanical Engineering, City University, Bangladesh
  • M. A. Kabir Department of Mechanical Engineering, City University, Bangladesh
  • Masud Rana Department of Mechanical Engineering, City University, Bangladesh
  • Ariful Islam Department of Mechanical Engineering, City University, Bangladesh
  • Md. Shawkut Ali Khan Department of Mechanical Engineering, City University, Bangladesh
Keywords: Characterization, monocrystalline silicon solar cell, surface texturing, phosphorus diffusion

Abstract

This paper focuses on examining the characteristic analysis of the textured and diffused silicon wafer. Characterization performance of the textured and diffused wafer using surface reflection method, sheet resistance method, SEM, and surface photovoltage method is examined. From the SRM result, it is observed that the reflection of the textured wafer is lower than the raw wafer. This means that the textured wafer forms the pyramid structure, which was measured by SEM. Sheet resistance measures the resistivity of the raw wafer and after phosphorous diffusion into the p-type silicon, the wafer are 2.3 Ω-cm and 0.80 Ω-cm respectively. From the sheet resistance results, it is observed that the phosphorus doping is properly done. The Surface Photovoltage (SPV) result shows that minority carrier diffusion length and lifetime for a solar cell is 86.4μm and 2.8 μsec respectively.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

PlumX Statistics

Published
2021-05-31
How to Cite
Rubel, A., Kabir, M. A., Rana, M., Islam, A., & Ali Khan, M. S. (2021). Characterization Analysis of Textured and Diffused Monocrystalline Silicon Wafer. European Scientific Journal, ESJ, 17(17), 125. https://doi.org/10.19044/esj.2021.v17n17p125
Section
ESJ Natural/Life/Medical Sciences